Core Concepts | Holosun EPS Carry Reset

Wiki Article

The Holosun EPS Carry is an excellent choice for concealed carry enthusiasts. But even with its intuitive design, sometimes you need a solid reminder on the basics. This article dives into the essentials of resetting your Holosun EPS Carry, ensuring you're always ready to deploy. We'll cover everything from getting acquainted with the reset mechanism to troubleshooting common issues. Let's get back to basics and make sure your Holosun EPS Carry is firing on all cylinders

By understanding these fundamentals, you can ensure your Holosun EPS Carry is always ready when you need it most.

Resetting Your Holosun EPS Carry Red Dot

Your Holosun EPS Carry red dot sight is a robust device, but even the best gear can sometimes need a little TLC. If your EPS Carry seems to be behaving erratically, a simple reboot might just do the trick.

First, locate the power button on the side of your red dot sight. It's usually a small, tactile lever. Press and hold this switch for about 3 seconds until you see the red dot flicker. This indicates that your Holosun get more info EPS Carry is now off and ready to be re-powered.

After the sight has powered down, release the switch and wait for a couple of seconds. Then, press the activation switch again to power on your red dot. The red dot should now come back on as normal.

If this simple reboot doesn't resolve your issue, you might want to consult the user manual or contact Holosun customer support for further assistance.

Return to Defaults for the Holosun EPS Carry

Performing a factory reset on your Holosun EPS Carry can be useful if you're experiencing issues with the sight or simply want to return it to its original configuration. This process will erase all user-defined settings and restore the sight to its factory defaults.

To begin, find the small reset button on the side of your EPS Carry. Use a thin tool like a paperclip or the tip of a pen to press this button. Hold it down for about five seconds until you see the display change. Release the button and your Holosun EPS Carry will now be reset to factory settings.

Return to Factory Settings on Holosun EPS Carry

Need reinitialize your Holosun EPS Carry at its original configuration? Follow these simple steps.

First, identify the small activation switch on the side of your EPS Carry.

Using a small tool, gently press and hold the button for approximately 10 seconds. You should see the display flicker, indicating that the reinitialization process is complete. Release the button and your Holosun EPS Carry will now be reset to original values.

Resetting the Holosun EPS Carry Red Dot to Default

Occasionally, you could need to return your Holosun EPS Carry Red Dot to its initial settings. This process is easy and can be performed in a few moves. First, make sure the device is powered off. Next, locate the small switch on the bottom of the optic.

Hold this lever for around five moments. You should see a alternating light on the display, which indicates that the recalibration is successful. Release the lever and your Holosun EPS Carry Red Dot will now be at its default settings.

Mastering Default Settings: Holosun EPS Carry Guide

Navigating the world of red dot sights can be a tricky task, especially when you're diving into the versatile Holosun EPS Carry. This compact and powerful optic is designed to perform in a carry scenario, but unlocking its full potential requires understanding its default settings. This guide will illuminate the key configurations you can make to fine-tune your EPS Carry for a smooth carry experience.

Report this wiki page